Hydra-Tech S6105 Hydraulic Submersible Solids Handling Pumps

The Hydra-Tech S6105 is designed for applications where high heads and the ability to handle solids is required. A typical use for this pump would be as a temporary sewage lift station where force main pressures are encountered.


  • Balanced High Efficiency Two Vane Closed Channel Impeller
  • Will Pass 3″ (75 mm) Semi-Solids
  • 6″ Discharge
  • Oil Lubricated Seals (Can Run Dry)
  • Variable Speed Hydraulic Drive
  • High Efficiency Balanced Vane Hydraulic Motor
  • Wide Range of Performance
  • Can Be Bolted Directly Into a Pipeline
  • Safe Hydraulic Drive Can Be Used Where Electric Power is Hazardous or Impractical
  • Operates With Our HT150DV and HT150DJV Power Units or Other Hydraulic Power Sources with flows up to 70 GPM
Hydraulic Submersible Solids Handling Pumps Hydra-Tech S6105
WEIGHT:              625 lbs. (283 kg)
HEIGHT:                   36" (91 cm)
WIDTH (@ widest point):   25" (64 cm)
DISCHARGE:                4", 150# ANSI Flange
INLET:                    4", 150# ANSI Flange
SOLIDS HANDLING:          3" (75 mm)
HOSE PORTS:    1-1/4" Code 61 Flange or 1-1/2" NPT (F)
PUMP BODY:                Ductile Iron
IMPELLER:                 Ductile Iron
WEAR RING                 Ductile Iron
SHAFT:                    17-4 PH Stainless Steel
SHAFT SEAL:               Silicon Carbide
ELASTOMERS:               Buna N (Std)
HYDRAULIC OIL:            214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW:               Max 70 GPM (265 LPM)
OPERATING PRESSURE:       Max 2500 PSI (170 Bar)
POWER SOURCE:             Any Open Center Hydraulic System

Click here for detailed specifications.