J175G1L Series Sludge and Mixed-Biosolids Progressive Cavity Pump

J175G1L Series Sludge and Mixed-Biosolids Progressive Cavity Pump

The J175G1L Series Sludge and Mixed-Biosolids Progressive Cavity Pump is ideal for sludge treatment and for pumping both light and coarse sludges and secondary mixed biosolids. The J175G1L Series Sludge and Mixed-Biosolids Progressive Cavity Pump’s flow rate is 175 gallons/100 revolutions @ 518 to 788 GPM is coupled to its high temperature resistance of up to 350° degrees Fahrenheit.

All replacement pump parts for the J175G1L series dimensionally interchange with other popular manufacturers pump models like the *Moyno® 2000 Series, the *Tarby® Century V Series, and the *Continental CG Series of Progressive Cavity Pumps as aftermarket replacements.

Sludge and Biosolids Pumping puts heavy rotational forces on a progressive cavity pump. The J175G1L’s heavy-duty construction allows it to perform in the difficult environments of the wastewater industry and liquid sludge and Biosolids transfer field with its heavy-duty construction.

The J175G1L Series Sludge and Mixed-Biosolids Progressive Cavity Pump’s low shear and gentle pumping action enables it to pump fluids and not emulsify the liquid making it an ideal mixed-biosolids or a sludge removal and transfer pump with a solids handling capability of up to 50% by weight.

The J175G1L Series Sludge and Mixed-Biosolids Progressive Cavity Pump is a standard ANSI flanged pump manufactured with high strength cast Iron or 316 Stainless Steel pump casings and designed in 1, 2 and up to 4 stages for 85, 170, and 350 psi discharge pressures. Standard suction and discharge flange size for the J175G1L is 10″.

The pump’s modular design comes with a positively sealed, hardened gear joint assembly, hardened tool steel rotors or stainless steel rotors both with hard chrome plating for long-life pumping and a wide selection of stators in Buna Nitrile, Viton®, EPDM and Natural Rubber. All other wetted parts are either carbon steel or 316 stainless steel. The standard seal design is a set of packing with a Lantern Ring and flush connections. Mechanical seal options are available.

Technical Data

  • FLOW RATE – 406 – 517 GPM
  • PRESSURE – 85 – 350 PSI
  • SEAL OPTIONS – Packing and Mech. Seal
  • BASE OPTIONS – Steel and Stainless Steel
  • INLET/OUTLET – 8″ x 8″ – ANSI Flange
  • ROTORS – Chrome Plated Tool Steel or Stainless Steel
  • STATORS – Buna Nitrile /Viton®/EPDM/Rubber
  • MOTOR OPTIONS – 7.5 – 40 HP

Features

  • Low Shear
  • Solids handling up to 50%
  • Hardened Joints
  • Packing or Mechanical Seal
  • 3-Stage Options
  • Steel or Stainless Steel

Click here for J175G1L Series Sludge and Mixed-Biosolids Progressive Cavity Pump Brochure

Request Information